Cisco Telepresence System Maintenance and cleaning

Profile, C, EX, SX, MX,

 

Vacuum cleaning

 

After any vacuum cleaning of the room, verify that no power cables have been loosened.

[notice]Caution –¬†The vacuum cleaner must never be connected to any of the PC power outlets of the table![/notice]

 

Touch

The screen should be cleaned using the screen cleaning cloth that comes with the system.

 

Camera Lens

Do not touch the camera after installation is completed. If you need to clean the camera lens, use a dry microfiber cloth. After cleaning, you will need to realign the camera.

 

Main video display

The screens should be cleaned using the glass cleaning and the microfiber cloth

 

System enclosures

Clean with a detergent made for glass cleaning and the microfiber cloth. Apply the detergent to the cloth only. Do not spray directly on the system.

 

 

On TX9000 you also need

 

Maintaining the Tabletop

 

[notice]Caution – Waxing or rubbing the surface with any type of abrasive is not recommended.[/notice]

 

  • For general daily care – use a dampened cloth with clean water.
  • To remove dirt – use a mild soap and water solution. Wipe off with clean water afterward to removethe soap.
  • To remove ink marks – rub the stained area with a pencil eraser.
  • To polish the tabletop – use lemon oil.

 

[notice]Note – Lemon oil is not recommended for daily use.[/notice]

 

Cleaning the Displays

Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to whicha small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

 

Cleaning the Camera Lens

[notice]Caution Do not touch the camera after installation is completed.[/notice]

If you need to clean the camera lens, use a dry microfiber cloth. After cleaning, you will need to realign the camera.

 

Cleaning the system

Use a clean, soft cloth with warm water and mild soap to remove any marks on your Cisco TelePresence white speaker screens.

 

[notice]Caution –¬†Using anything other than a soft cloth, warm water and mild soap may permanently damage the display screen.[/notice]

Replac ing fluids and cloths

Whenever needed, the microfibre cleaning cloth should be replaced by a microfibre cloth designed for glass cleaning.

Screen cleaning kit should be replaced by 3M Screen and Keyboard Cleaner.